WS2812B RGB LED Cube 9x9x9 – Build 2015/02/08

To keep the dust out I’m using a removable acrylic cover to sit on top of the box.

This comprises of the following pieces of cut to size 4mm acrylic.

1*292mmx292mmLED Cube acrylic sheets

Tensol 12 was used to glue the sheets together.

Completed dust cover.

LED Cube - dust cover completed

The dust cover sitting on the LED cube base.

LED Cube - dust cover and base

.The protective film is still on the top piece of acrylic which is why it’s not as transparent as the sides.

Comments are closed.