Sunday Soldering

Sunday soldering was again dominated by soldering headers this week. This DeekRobot Arduino Micro clone, Teensy 3.1, Iteaduino MEGAtime we had a DeekRobot Arduino Micro clone, Teensy 3.1 and an Iteadstudio MEGA.

P1050129One thing I noticed on the Micro clone was the orientation of the resistor network (labelled 220) was different on the 2 boards. I would have expected the pick and place to have put them the same way around or can they be “mixed” in the tape?

P1050140sFor one of the Teensy 3.1 I decided to solder the SMD header on as I may need to use the additional ADC ports for one of my current projects.

 

I also hooked up a China special 70A 5V PSU that came earlier in the week which seems to work OK with a small load.

P1050141s

Leave a Reply

Your email address will not be published. Required fields are marked *